Several chic and inexpensive options exist for preventing a bed from sliding about on a wooden floor, in case you were wondering. A few examples include placing a mat beneath the bed, attaching pads with velcro, grippers made of rubber, taking the wheels off, and using caster cups. Continue reading to learn about all ten approaches and how simple they are to put into practice.
Why Do Beds Slide On A Wooden Floor?
When two perfectly smooth surfaces touch, they will slide past each other. This is because the surfaces do not rub against one another; that is, there is no friction as neither surface has an abrasive finish.
Beds have smooth surfaces, meaning the bottom of their feet do not have any rough or abrasive surfaces. Therefore, the bed will slide over a hardwood floor when its smooth feet contact the floor.
Naturally, the bed slides because it is a moveable object, unlike the floor, which is stationary.
From a practical standpoint, it’s not necessary to have hardwood for the bed to move; any smooth surface would do. This means the same applies to other types of flooring, such as laminate or tile: the bed will slide around on them too.
Why Is A Bed That Slides On A Wood Floor So Irritating?
There are several ways in which a sliding bed might be inconvenient. Scratches and other ugly floor markings are one potential consequence of a sliding bed. The beauty and durability of the wood floor are diminished by this.
Second, bumps and scrapes in wallpaper or chipped paint could result from a sliding bed’s headboard touching a wall.
You might not get as good of a night’s rest if your bed slides around every time you shift positions in it.
Is It Only Lightweight Beds That Slide On A Wood Floor?
The truth is that metal bedframes are more prone to sliding on wooden flooring than other materials. This is due to the fact that metal bedframes are typically somewhat light and can thus be moved about with relative ease.
Metal beds, which are much heavier, can nonetheless slide about on a wooden floor. The extra weight they carry also increases the risk of damage to floors.
Thankfully, altering your bedframe won’t be necessary to fix this issue, saving you both time and money. If your bed keeps slipping about your bedroom, there are a number of chic and inexpensive solutions. Keep reading to find more about them.
How To Stop A Bed From Sliding On Wood Floor – 10 Different Methods
It should be clear to you now why a bed won’t stay put on a wooden floor. You should also be aware of how annoying it is when a bed slides around on a hardwood floor. Last but not least, you should be familiar with the various bed types that glide across wooden floors.
Now let’s look at the 10 different ways to stop a bed from sliding on a wood floor.
1. Put a rug underneath the bed (or a carpet)
When it comes to preventing a bed from sliding on a wooden floor, this is the most fashionable option.
Your hardwood floors certainly complete the bedroom’s stylish design. Putting a rug in the space between the floor and the bed will not change that. The rug can end as being the finishing touch that your bedroom needs.
If you want this strategy to work, pick out a rug that complements the room’s design. The rug’s non-slip backing should be your first priority. Cowhide rugs are durable and simple to maintain, so they might be a good option. Rugs with a high pile or shaggy rug are two more fantastic alternatives.
2. Rubber Caster Cups
Instead of utilizing adhesives, you can use rubber caster cups to keep your bed from sliding about. They hold the bed’s wheels in place like a cup. To prevent slipping on wooden flooring, they include a cushioned bottom grip. Your bed will now stay put when you insert its wheels into the cups.
Caster cups are long-lasting and usually sold in sets of four.
3. Attach Self Adhesive Rubber Grippers
If your bed is slipping, try using self-adhesive rubber grippers.
The two sides of self-adhesive rubber grippers are an adhesive side and a non-slip rubber grip side.
Stick the sticky side of the self-adhesive rubber grips to the bottom of the legs of the furniture to utilize them. The non-slip rubber will be the side that touches the floor.
Compared to non-adhesive rubber grippers, these self-adhering ones provide an extra layer of security, which is appreciated by many households. They are adhesive, so you won’t have to worry about them falling off the legs of your furniture.
4. Attach Rubber Grippers (NON adhesive)
These rubber grippers are non-adhesive, as the name indicates. Putting them under the bed’s wheels or legs is all that’s required. The gripper maintains its position between the bed and the floor thanks to the extremely effective anti-slip rubber substance. Because of this, the bed will not be able to slide or move.
5. Install Velcro Pads
The use of Velcro pads attached to the feet of the bed is an additional method for preventing the bed from sliding on a wooden floor. One advantage of using Velcro pads is that they are so tiny that no one would ever suspect their presence. Consequently, neither the room’s nor the bed’s attractiveness would be compromised.
Velcro pads can be joined by hooking their loop sides together. The two sides of the pad that would be attached to the Velcro would be its top and bottom. After that, you can just put the pad to the floor by attaching one side to the bed’s legs; the other side is adhesive as well.
The only possible drawback of this procedure is that the Velcro is now permanently attached to the floor. Because of this, the next time you try to remove it off the floor, it can leave stains or marks.
6. Relocate Your Bed To The Corner Of The Room
Relocating the bed to a different part of the room is a common and easy way to fix a sliding bed.
There is no additional support to keep your bed from moving around if it is only against one wall, or maybe there aren’t any walls at all. You may accommodate the bed’s four corners by repositioning it to one of the room’s corners. In other words, you cut its mobility in half. Put another way, you increase its stability by a factor of two.
Despite its simplicity, you might be reluctant to implement it because it could necessitate completely revamping your bedroom. On top of that, getting into the bed would require one user to practically climb from the bottom if there were two people sleeping on it. Also, that might not go down well.
Putting the bed in a corner might not be an option for many homes due to the reasons mentioned earlier. Still, it’s something to think about, particularly if you’re open to giving your bedroom a new style.
7. Install Rubber Feet On The Bed
If your bed tends to slide about on wood floors, try using rubber feet.
The non-slip rubber used to make these shoes is exceptionally thick and long-lasting. The rubber feet that attach to screws offer a more long-term option than alternatives. This is due to the fact that in order to install them, you must first drill holes in the bed’s legs from underneath.
Rubber feet that adhere to the legs of the bed using glue instead of screws are another option.
By using this method, the rubber feet can be made to blend in with the legs of the bed. One more fantastic perk.
8. Wrap The Bottom Of The Frames With Bicycle Tyres
To prevent a bed from sliding about on a wooden floor, this may be the ugliest option, but it may work.
A bed with U-shaped legs is the most common type that might benefit from this technique. An effective cutting tool and several old bicycle tires are required.
Take the measurement of the U-shaped legs as a guide to cut the tires to size. The next step is to secure the tyres around the bed’s legs in such a way that the tread makes touch with the bed’s legs on the inside and the floor on the outside.
It all depends on your perspective; with a little imagination, you could make this solution seem either very contemporary and sleek or very old-fashioned and quaint.
9. Change The Legs Of The Bed
The ability to simply swap out the legs for an alternate set is a feature of many beds that not many people know about. If you have a wooden floor, this may prevent the bed from sliding about.
You can choose a set of bed legs that works for you among the many varieties of rubberized and anti-slip options available.
Keep in mind that you will need to do some heavy lifting and physical labor in order to change the bed’s legs. Reason being, you’d have to be deft with the bed to remove the old legs and put the new ones on.
Because of this, you should only attempt this procedure if you have someone to assist you.
10. Use Bed Risers
A bed riser is like a pair of rubber feet for your mattress. On the other hand, beds on hardwood floors can still slide around even with bed risers. On the other hand, bed risers were invented to raise beds so that more space could be made under them for storing purposes.
On the other hand, many individuals utilize bed risers as a means to both elevate their bed and keep it from sliding around, thanks to the fact that they are often constructed from non-slip rubber. If you want to prevent your bed from sliding about, employing bed risers are a better option than using plain rubber feet.
Your bed may be raised anywhere from three inches to twenty-four inches high with the right bed risers. While there is a wide variety of shapes for bed risers, the most common ones are cone and pyramid.
Some people might not be good candidates for bed risers, despite the fact that they prevent your bed from sliding and also provide storage space under your bed. As an example, some people could be unhappy with how much higher their bed is now compared to the floor.
Final Thoughts On How To Stop A Bed From Sliding On Wood Floor
There are plenty of different answers to the question of how to stop your bed from sliding on a hardwood floor.
Several excellent, low-cost, and even free solutions to this issue are detailed in this article. Some options will let you fix the problem in an elegant manner, while others may necessitate some do-it-yourself work on your part.
Choose the approach that works best for you by taking your time and considering your lifestyle and level of DIY expertise.